
Radio Operations
Listening to the radio | 3 Start searching for a station |
1 Select the Tuner |
|
SOURCE
“Auto Search” begins.When a station is received, searching stops.To stop searching, press the same button.ENGLISH
2 Select the band (FM/AM)
AM
FM3
OK | FM1 FM2 |
| |
BAND |
|


This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
To tune in to a station manuallyIn step 3 above...
Hold Hold
then
Activate “Manual | Select station | |
frequencies. | ||
Search.” | ||
|
What information is shown on the display
The following information are shown commonly for tuner operations.• If you press DISP on the control panel, the display will show the different information or different screens (see page 14).
Preset number if any
Current band
See page 12. Station Frequency (with its icon) Station name assigned* (with its icon)
* To assign names to the stations, see page 35.11