41 | KDC-BT92SD English | 42

Clock and Other Functions

Theft Deterrent Faceplate

The faceplate of the unit can be detached and
taken with you, helping to deter theft.
Removing the Faceplate

1

Press the Release button.
Drop open the faceplate.

2

Drawing the faceplate to left side pull it to
forward and remove it.
¤
• Thefaceplateisaprecisionpieceofequipmentandcan
be damaged by shocks or jolts.
• Keepthefaceplateinitsfaceplatecasewhiledetached.
• Donotexposethefaceplate(andthefaceplatecase)to
direct sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
Reattaching the Faceplate

1

Align the shaft on the unit with the depression
on the faceplate.

2

Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to
use the unit.

Initial Settings

You can select following Initial Setting items.

1

Select the Standby
Pressing the [SRC] button repeatedly switches
source.
Select the “STANDBY” display.
✍SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.

2

Enter Menu List mode
Press the [MENU] button.

3

Enter Initial Setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Initial Settings”.

4

Select the setting item to adjust
Turn the [VOL] knob.
Display Overview
“Initial Settings”
“SRC Select” Sets the source selection method.
“Settings 1”/ “2”
“Beep” Setting the operation check sound (beep sound)
ON/OFF.
“OFF”/ “ON”
“Russian” When this is set to ON, the following character
strings are displayed in Russian:
Folder name/ File name/ Song title/ Artist
name/ Album name
“OFF”/ “ON”
“Menu Language” You can select the display language for the
Menu list item.
“English”/ “Français”/ ”Español”/ “Deutsch”/
“Italiano”/ “Pyccкий”
“Power OFF Wait” Setting the timer to turn this unit’s power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle’s battery
power.
“-----”/: Power OFF Timer function is OFF.
“20min”/ “40min”/ “60min”: Turns the power
OFF after minutes.
“Built in AUX” When this is set to ON, AUX source can be
selected.
“ON”: Allows AUX source to be selected. Use
this setting when the built-in AUX terminal
is connected to the external equipment all
the time.
“OFF”: Disable AUX source selection. Use this
setting when the built-in AUX terminal is
not used.
“Forced CD-DA” Sets the CD read mode.
“Settings 1”: Automatically distinguishes
between audio file disc and music CD when
playing disc.
“Settings 2”: Forces playing as music CD.
“Built in AMP” Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
“OFF”/ “ON”
“DSI” DSI (Disabled System Indicator) of the unit blinks
when the faceplate is removed.
“OFF”/ “ON”
“F/W Update” Updates the firmware. The update information
will be posted on the following URL as
necessary.
www.kenwood.com/cs/ce/
( : Factory setting)

5

Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.

6

Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.

Demonstration mode Setting

Turning the demonstration mode ON/OFF.

1

Enter Menu List mode
Press the [MENU] button.

2

Enter Demonstration mode setting
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “DEMO Mode”.

3

Set the Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.

4

Exit Menu List mode
Press the [MENU] button.