ENGLISH
MAINTENANCE
To extend the lifetime of the unit
This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below.
To clean the heads
•Clean the heads after every 10 hours of use using a
– Sound quality is reduced.
–Sound level decreases.
–Sound drops out.
• Do not play dirty or dusty tapes.
• Do not touch the
To keep the tape clean
•Always store the tapes to their storage cases after use.
•Do not store tapes in the following places:
–Subject to direct sunlight
–With high humidity
– At extremely hot temperatures
CAUTIONS:
•Do not play the tapes with peeling labels; otherwise, they can damage the unit.
•Tighten tapes to remove slack since loose tape may become entangled with the mechanism.
•Do not leave a cassette in the cassette compartment after use, as the tape may become slack.
The function below is also provided to ensure the longer life of this unit.
Ignition key-off Release/Ignition key-on play
•When you turn off the ignition key with a cassette in the compartment, the unit automatically releases the tape from its head.
•When you turn on the ignition key with a cassette in the compartment, playback automatically starts.
How to Reset your unit
Press and hold both the SEL (Select) and 
(Standby/On/ATT) buttons at the same time for several seconds.
This will reset the
NOTE: Your preset adjustments — such as preset channels or sound adjustments — will also be erased.
(Standby/On/ATT)
SEL (Select)
28
