JVC KS-FX601, KS-F501 manual Selecting the external component to use

Selecting the external component to use

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this receiver, you need to select which device — CD changer or external component — to use. When shipped from the factory, CD changer is selected as the external component.

LINE IN: To use the external component other than CD changer

CHANGER: To use the CD changer

ENGLISH

4

2,5 1 3

1 KS-FX701 KS-FX601

Change the source to FM, AM or TAPE.

2

Press and hold SEL for more than 2 seconds.

“CLOCK H”, “CLOCK M”, “SCM LINK”, “LEVEL”, “B.SKIP” or “EXT IN” appears on the display.

3

Select “LINE IN” if not shown on the display.

4

Select the desired mode — “LINE IN” or “CHANGER”.

5

Finish the setting

Note:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the	27
Installation/connection Manual (separate volume).