Headlight replacement

What to buy

This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover part No. 27313101.

3-7

3-8

3-9

Removing lens

Disconnect cleaner from electrical outlet.

Using a screwdriver, remove the two screws as shown and lift off lens.

Installing bulb

Replacing lens

Pull old bulb straight out of socket.

Reposition lens and secure with the

Push new bulb straight into socket

two screws.

until locked in place.

 

Excessive force is not required.

Belt replacement

The belt on your Hoover cleaner causes the agitator to rotate and is important for the effective operation of the cleaner. The belt is located under the bottom plate of the cleaner and should be checked from time to time to be sure it is in good condition.

When to replace

Disconnect cleaner from electrical outlet.

To check belt, remove bottom plate as shown in “How to replace”. Replace belt if it is stretched, cut or broken.

What to buy

To assure effective operation, use only genuine HOOVER belts with your cleaner. When purchasing a new belt, ask for HOOVER part No. 38528033 (belt package no. 40201160).

3-10

A

How to replace

Disconnect cleaner from electrical outlet.

Removing bottom plate

Place handle in low position and turn cleaner over so bottom side is up.

Remove the 4 screws as shown with a Phillips screw driver.

Lift off bottom plate (A).

3-11

Removing belt

Remove agitator brush roll and used belt.

Discard used belt.

3-12

B

B

D

Installing new belt

With lettering on outside of belt and positioned as shown in box on (D), slide new belt over motor pulley (B).

10

3-13

C

E

D

Replacing agitator brush roll

Insert agitator through belt and place belt in belt guide (C) on agita- tor.

Should the agitator shield (D) be- come dislodged while replacing the belt or the agitator, reposition it as shown noting the placement of its belt guide (E).

3-14

F

G

Securing agitator

Grasp agitator firmly and fit it into position by first sliding end opposite the belt into the rectangular slot (F) on side of cleaner.

Pull other side of agitator (G) into place.

Turn agitator making sure belt is not pinched between agitator and agita- tor shield.

Page 10
Image 10
Hoover U5458910 manual Headlight replacement, Belt replacement, How to replace

U5458910 specifications

The Hoover U5458910, a popular vacuum cleaner model, has gained significant attention for its blend of efficient performance and user-friendly features. Designed for both carpet and hard floor cleaning, this model showcases a variety of technologies aimed at enhancing cleaning efficiency and convenience.

One of the standout features of the Hoover U5458910 is its powerful motor, providing strong suction capabilities that ensure dirt, dust, and debris are effectively removed from various surfaces. The vacuum utilizes a multi-cyclonic filtration system that helps separate larger particles from fine dust, ensuring that the filter remains clean for longer periods. This technology also aids in improving overall suction power, allowing for more thorough cleaning without the need for constant filter replacement.

The U5458910 comes equipped with a HEPA filter, which captures 99.97% of dust and allergens as small as 0.3 microns. This feature is particularly beneficial for allergy sufferers, as it helps maintain a healthier home environment by preventing allergens from being released back into the air. Furthermore, the filter is washable, which adds to the long-term cost-efficiency of owning this vacuum.

In terms of maneuverability, the Hoover U5458910 weighs in at a reasonable weight, making it easy to lift and carry around the home. Its ergonomic handle ensures a comfortable grip during use, reducing strain on the hands and wrists. The vacuum also features a 12-foot hose, allowing users to reach higher surfaces like drapes and ceiling corners without difficulty.

Another noteworthy characteristic is the vacuum's multiple floor settings. This feature allows users to adjust the brush roll height, making it suitable for various types of flooring, from plush carpets to delicate wood floors. Additionally, the U5458910 includes a variety of onboard tools, such as a crevice tool and dusting brush, which enhance its versatility for various cleaning tasks.

The Hoover U5458910 is designed with a clear dirt cup, making it easy to see when it’s time to empty. This feature, combined with a simple release mechanism, ensures that emptying the vacuum is a quick and mess-free process.

Overall, the Hoover U5458910 stands out for its combination of advanced technologies, user-friendly design, and powerful performance, making it a reliable choice for households looking for thorough and efficient cleaning solutions.