Changing filter bag

Disconnect cleaner from electrical outlet.

3-1

Removing bag door

To change filter bag, press down at top of bag door and pull door for- ward.

Remove door.

3-2

B

A

Removing and installing filter bag

Grasp filter bag collar (A) and pull collar from tube (B).

Note: Do not clean out old filter bag and reuse. Discard used filter bag.

Hold new filter bag as shown. Align opening in filter bag with (B).

Push (A) firmly onto (B). Tuck in filter bag.

3-3

C

Replacing bag door

Reposition bag door by placing tabs on bottom of door into opening (C).

Press top of door to snap securely shut.

Secondary and final filters

3-4

A

Cleaning secondary filter

Disconnect cleaner from electrical outlet.

The secondary filter (A), located behind the grill in the bottom of bag compartment, protects the motor from dirt particles.

If filter becomes dirty, pull off grill and lift out filter.

Hand wash filter in cold water with mild detergent, then air dry.

Reposition dry filter and grill.

Should you want to replace this filter, ask for HOOVER part No. 38765019.

3-5

B

Cleaning final filter

The final filter assists in the filtra- tion process to return clean air to the room.

To remove this filter when it be- comes dirty, open the door on the side of the cleaner.

Lift out filter (B) and hand wash it in cold water with mild detergent.

Let filter air dry and reposition it on the side of the cleaner. Make sure the green colored side of filter faces outward. Close door.

Should you want to replace this fil- ter, ask for HOOVER part No. 40110004.

Do not operate cleaner without either the secondary or final filter in place.

3-6

C

Reattaching filter door

The filter door is designed with a “break-away“ feature which allows it to snap free if it is pushed open too far.

To reattach, align hinges (C) of cover with slots on sides of filter area.

Press door back into place.

Check agitator shield

Because your cleaner picks up so well, we strongly recommend you check for debris accumulation under the agitator shield each time you clean the filters.

Removing debris under the shield will help maintain your cleaner’s excellent pick up and suction. Remove debris as follows:

1.Disconnect cleaner from electri- cal outlet.

2.Check for dirt accumulation by removing bottom plate (Fig. 3-10), removing agitator (Fig. 3-11), and lifting agitator shield (Fig. 3-13).

3.Remove any debris and replace shield, agitator and bottom plate (Figs. 3-13 to 3-15).

9

Page 8 Page 10
Page 9
Image 9
Hoover U5458910 manual Secondary and final filters
Page 8 Page 10

U5458910 specifications

The Hoover U5458910, a popular vacuum cleaner model, has gained significant attention for its blend of efficient performance and user-friendly features. Designed for both carpet and hard floor cleaning, this model showcases a variety of technologies aimed at enhancing cleaning efficiency and convenience.

One of the standout features of the Hoover U5458910 is its powerful motor, providing strong suction capabilities that ensure dirt, dust, and debris are effectively removed from various surfaces. The vacuum utilizes a multi-cyclonic filtration system that helps separate larger particles from fine dust, ensuring that the filter remains clean for longer periods. This technology also aids in improving overall suction power, allowing for more thorough cleaning without the need for constant filter replacement.

The U5458910 comes equipped with a HEPA filter, which captures 99.97% of dust and allergens as small as 0.3 microns. This feature is particularly beneficial for allergy sufferers, as it helps maintain a healthier home environment by preventing allergens from being released back into the air. Furthermore, the filter is washable, which adds to the long-term cost-efficiency of owning this vacuum.

In terms of maneuverability, the Hoover U5458910 weighs in at a reasonable weight, making it easy to lift and carry around the home. Its ergonomic handle ensures a comfortable grip during use, reducing strain on the hands and wrists. The vacuum also features a 12-foot hose, allowing users to reach higher surfaces like drapes and ceiling corners without difficulty.

Another noteworthy characteristic is the vacuum's multiple floor settings. This feature allows users to adjust the brush roll height, making it suitable for various types of flooring, from plush carpets to delicate wood floors. Additionally, the U5458910 includes a variety of onboard tools, such as a crevice tool and dusting brush, which enhance its versatility for various cleaning tasks.

The Hoover U5458910 is designed with a clear dirt cup, making it easy to see when it’s time to empty. This feature, combined with a simple release mechanism, ensures that emptying the vacuum is a quick and mess-free process.

Overall, the Hoover U5458910 stands out for its combination of advanced technologies, user-friendly design, and powerful performance, making it a reliable choice for households looking for thorough and efficient cleaning solutions.
Top Page Image Contents