Personal Safety

1.Stay alert. Watch what you are doing and use common sense when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of injury to persons.

2.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair increases the risk of injury to persons as a result of being caught in moving parts.

3.Avoid unintentional starting. Be sure the switch is off before connecting to the air supply.

Do not carry the tool with your finger on the switch or connect the tool to the air supply with the switch on.

4.Remove adjusting keys and wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool increases the risk of personal injury.

5.Do not overreach.

Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

6.Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions. Wear heavy-duty work gloves during use.

7.Always wear eye protection.

Wear ANSI-approved safety goggles.

8.Always wear hearing protection when using the tool.

Prolonged exposure to high intensity noise is able to cause hearing loss.

Safety

Setup

Tool Use and Care

1.Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against the body is unstable and is able to lead to loss of control.

2.Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed.

3.Do not use the tool if the switch does not turn the tool on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

4.Disconnect the tool from the air source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool unintentionally. Turn off and detach the air supply, safely discharge any residual air pressure, and release the throttle and/or turn the switch to its off position before leaving the work area.

5.Store the tool when it is idle out of reach of children and other untrained persons.

A tool is dangerous in the hands of untrained users.

6.Maintain the tool with care. Keep a cutting tool sharp and clean. A properly maintained tool, with sharp cutting edges reduces the risk of binding and is easier to control.

7.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

There is a risk of bursting if the tool is damaged.

8.Use only accessories that are identified by the manufacturer for the specific tool model. Use of an accessory not intended for use with the specific tool model, increases the risk of injury to persons.

Operation

Maintenance

Item 98580

For technical questions, please call 1-800-444-3353.

Page 3

Page 2 Page 4
Page 3
Image 3
United States Pumice Company 98580 manual Personal Safety, Tool Use and Care, Safety Setup, Operation Maintenance
Page 2 Page 4

98580 specifications

United States Pumice Company, located in the heart of the Pacific Northwest, specializes in the extraction and processing of pumice stone and its derivatives. With a ZIP code of 98580, this company stands out as a premier provider of high-quality pumice products, which are essential in various industries, from construction to cosmetics.

Pumice is a volcanic rock that forms when lava cools quickly, trapping gas bubbles that create its lightweight and porous structure. This unique characteristic not only makes pumice an ideal material for a range of applications but also enhances its effectiveness as a natural abrasive. The United States Pumice Company focuses on sustainable mining practices, ensuring minimal environmental impact while supporting the local economy.

One of the key features of United States Pumice Company is its state-of-the-art processing technology. The company employs advanced machinery that allows for the precise grinding, milling, and screening of pumice products. This technology ensures that the final products maintain their integrity and meet stringent quality standards. In addition, the company has invested in automated systems to enhance operational efficiency and reduce waste, making the production process more sustainable.

The characteristics of the pumice products offered by United States Pumice Company are diverse. Their pumice stones are known for their lightweight nature and unique textures, making them perfect for use in lightweight concrete, filtration systems, and horticultural applications. The company also offers pumice powders, which serve as excellent abrasives in personal care products such as foot scrubs and exfoliants. Furthermore, these powders are used in the production of eco-friendly paints and coatings, showcasing their versatility.

In addition to their commitment to quality and sustainability, United States Pumice Company prioritizes customer service. They work closely with clients to understand their specific needs and provide tailored solutions. With a focus on innovation and responsiveness, the company continues to grow its market presence and enhance its product offerings.

In summary, United States Pumice Company 98580 is a leader in pumice mining and processing, harnessing advanced technologies and sustainable practices to produce high-quality pumice products. With a commitment to customer satisfaction and environmental stewardship, the company is well-positioned for continued success in the pumice industry.
Top Page Image Contents