United States Pumice Company 98580 manual Service, Air Source, Symbol Definitions, TyfeSa

tyfeSa

Service

1. Tool service must be performed only	3. Use only the lubricants supplied with the
by qualified repair personnel.	tool or specified by the manufacturer.

2.When servicing a tool, use only identical replacement parts. Use only authorized parts.

Air Source

eStup

1.Never connect to an air source that is capable of exceeding 200 psi.

Over pressurizing the tool may cause bursting, abnormal operation, breakage of the tool or serious injury to persons.

Use only clean, dry, regulated compressed air at the rated pressure or within the rated pressure range as marked on the tool. Always verify prior to using the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range.

2.Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an air source

for the tool. Such gases are capable of explosion and serious injury to persons.

Save these instructions. Symbols and Specific Safety Instructions

Symbol Definitions

atierOp

e nanc Maint

Symbol	Property or statement
no	No-load speed
.../min	Revolutions or reciprocation per minute
PSI	Pounds per square inch of pressure
ft-lb	Foot-pounds of torque
BPM	Blows per minute
CFM	Cubic Feet per Minute flow
SCFM	Cubic Feet per Minute flow
	at standard conditions

Symbol	Property or statement
NPT	National pipe thread, tapered
NPS	National pipe thread, straight
	WARNING marking
	concerning Risk of Eye Injury.
	Wear ANSI‑approved eye protection.
	WARNING marking concerning Risk of
	Hearing Loss. Wear hearing protection.
	WARNING marking concerning
	Risk of Respiratory Injury. Wear
	NIOSH‑approved dust mask/respirator.
	WARNING marking concerning
	Risk of Explosion.

Page 4 For technical questions, please call 1-800-444-3353. Item 98580