Cold Drink Center (327/328) Operator’s Guide
Adjustments and Minor Maintenance
1.Emptying the bill stacker:
2.Cup mechanism adjustment.
a.Place seven cups in the cup ring.
b.Observe the clearance as shown in view B.
c.If necessary adjust by first loosening the adjustment arm screw (view A).
d.Move adjustment arm until correct clearance is achieved.
e.Hold adjustment arm in place and tighten adjustment arm screw.
LOOSEN SCREW | ADJUSTMENT | ||||
|
| MOVE ARM | ARM | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
View A
View B
VIEW FROM BENEATH
CUP | CUP |
CAM | CAM |
CORRECT
ADJUSTMENT
This clearance is just | This side is snug |
large enough to allow | against cam |
cup ejection |
|
|
|
ADJUSTED
TOO TIGHT
ADJUSTED
TOO LOOSE
327p0015
August, 2003 | Page 12 | 3280020 |
