Cold Drink Center (327/328) Operator’s Guide
Install Options
1.Install the coin box lock:
a.Install the lock cylinder, washer, and nut in the order shown.
b.Tighten the nut.
c.Install the lock bar as shown, and secure with the screw.
2.Mount the base plate brackets:
a.Secure a base plate bracket at each of the remaining pairs of holes with two of the hex head screws.
3.Mount the base plate and slides:
a.Insert the short arm of the slides into the hinged tabs of the base plate. Position the slide so the notch near the short arm is on the bottom side.
b.Insert the long arms of the slides into the base plate brackets.
c.Insert a cotter pin through the hole in the back end of each slide. Secure the pins in place.
d.Push the base plate toward the merchandiser cabinet. The front tab of the base plate bracket should seat in the notch in the long arm of the base plate slides.
BASE PLATE
MOUNTING
LEFT HAND BASE PLATE SLIDE
BRACKET
COTTER
PIN
HEX HEAD
SCREW
RIGHT HAND
BASE PLATE
SLIDE
August, 2003 | Page 4 | 3280020 |
