Cold Drink Center (327/328) Operator’s Guide
SHORTCUT
Instead of stepping through the whole character set to enter a letter that is not on your keypad, enter one close to the one you want, then
step to it. Example: If you want to enter an L, first press |
| , | ||
|
|
|
|
|
then press |
| six times. Your L should now be displayed. |
| |
|
| |||
|
|
|
|
|
The End Of Message Character
This is the most important character in your message, because it tells the machine when the message is ended. If you don't use this character, your message will be followed by a bunch of zeros. This character can be selected either from the character set or by a direct key entry (see "Edit Custom Message" on page 49).
ENTERING YOUR MESSAGE
Most of the keys on the control panel have a special purpose to help you create and edit your messages:
Inserts an R at the flashing character.
Inserts an S at the flashing character.
Inserts a T at the flashing character.
Repeats the letter to the left of the flashing character.
Inserts a space at the flashing character.
Deletes the current character and closes up the space.
Deletes the current character and leaves the space.
Enters the special "end of message" character, which denotes the end of the mes- sage.
"Pages" through the message, ten characters (one screen) at a time.
Steps forward and backward through the message, one charac- ter at a time.
Steps forward and backward through the character list, one character at a time.
August, 2003 | Page 50 | 3280020 |
