![Set up the CO2 tank:](/images/new-backgrounds/65335/6533529x1.webp)
Cold Drink Center (327/328) Operator’s Guide
Set up the CO2 tank:
NOTE
A full CO2 tank can be dangerous if it is dropped or mishandled. Handle with care and keep the tank lid in place until the tank is properly secured in the merchandiser.
a.Place the power switch in the OFF position.
b.Install a full CO2 tank on the merchandiser as shown. Secure the CO2 tank with the retaining chain. (Note the various retaining chain configura- tions.)
ADJUSTMENT
SCREWCO2 CYLINDER
VALVE
ADJUSTMENT
LOCK NUT
CO2 HOSE
(REAR OF TANK SHOWN)
SYRUP TANKS
RETAINING
CHAIN
CO2 CYLINDER
LOCATION 1
RETAINING
CHAIN
RETAINING
CHAIN
CO2 CYLINDER
LOCATION 1
CO2 CYLINDER
327p0008
LOCATION 2
c.Remove the CO2 tank lid. Briefly open and close the CO2 cylinder valve to blow out any foreign matter.
d.Locate the CO2 regulator and flat plastic washer (in a box), and the tapered plastic washer (in plastic bag).
e.Connect the CO2 hose from the secondary regulator tee fitting to the reg- ulator. Firmly tighten the fitting.
3280020 | Page 9 | August, 2003 |