Everpure 325, 327 manual Entercode, Superxxxx, Freexxxx, Programming Procedures, Unlocked

Page 23

August, 2003

3. CONTINUE.

Cold Drink Center (327/328) Operator’s Guide

Programming Procedures

GAIN ACCESS TO THE SUPERVISOR MODE

1.	Press	. The display shows:			. You must enter the four-
	digit supervisor code within 6 seconds to gain access.
			NOTE
	A new machine has a factory-set supervisor code of 0000.
	When you have entered the right code, you will hear two beeps and see
	in the display.
2.	UNLOCKED
	CONTINUE.
	ENTER A NEW SUPERVISOR CODE
1.	Follow the steps in "Gain Access To The Supervisor Mode" on page 23.
2.	Press	. The display shows		SUPERXXXX	. The X's represent the
3280020					FREEXXXX
	current supervisor code. Use the number keys to enter a new code.
			NOTE
	If you enter a new code, be sure to keep a written record of it.
	There is no other way to access the SUPERVISOR mode.
3.	CONTINUE.			ENTERCODE
	ENTER A FREEVEND CODE
	(Supervisor Mode Only)
1.	Follow the steps in "Gain Access To The Supervisor Mode" on page 23.
2.	Press	, then	until the display shows			. The X's

represent the current freevend code. Use the number keys to enter a new code. If the code is anything other than "0000", it must be entered after the key lock is turned in order to enable free vends.