Cold Drink Center (327/328) Operator’s Guide
SET DEX OPTIONS
1.Follow the steps in "Gain Access To The Supervisor Mode" on page 23.
2. | Press |
| , then | until the display shows one of two resettable bill |
| validator totals transmitted to the DEX device: | |||
|
|
| - the value of bills in the stacker will be transmitted in a cash for- | |
| matCA304=N. For example: 200 for two dollars. (This is the default setting.) | |||
|
|
| - the value of bills in the stacker will be transmitted in a dollar | |
| count format. For example: 2 for two dollars. | |||
3. | Press |
| to switch between the two choices. Consult your DEX | |
| ||||
| ||||
handheld supplier for the proper settings for your machine.
NOTE
If the bill count is incorrect, the CA304 setting may be wrong. Try another setting.
4. | Press |
|
| until the display shows one of the following two options: | |
|
|
|
| - the DEX device will transmit the date and time of the last vend | |
| LAST.VND.O |
| for each selection. | ||
|
|
|
| - the DEX device will NOT transmit the date and time of the last | |
|
|
|
| vend for each selection. (This is the default setting) | |
5. | Press |
|
| to switch between the two choices. | |
6. | CONTINUE. |
| |||
|
|
| .C. |
|
|
|
| SELECT.O. | PRINTER BAUD RATE | ||
|
| (Printer mode only) | |||
| BAUD |
| The speed of data transfer, expressed in bits per second. | ||
|
| Your printer can receive data at a certain rate, and you must | |||
| RATE |
| |||
|
| tell the machine what that rate is. | |||
|
|
| |||
1. | Press |
| N | . One of the following is displayed: | |
|
|
| BAUDuntil the2400correctBAUDbaud4800rate forBAUDyour9600printer is displayed. | ||
2. | BAUDPress 1200FF | ||||
3.CONTINUE.
August, 2003 | Page 26 | 3280020 |
