Cold Drink Center (327/328) Operator’s Guide
| PCB | SureVend™ is ON but not working. The last calibration sam- |
| NOTE | |
|
| ple was 255. Check that the SureVend™ PCB is present at |
SV.ERR |
| J34. |
|
| SureVend™ is ON but not working. The last calibration sam- |
|
| ple was ≤ 50. Check for a blocked sensor or disconnected har- |
|
| ness. |
| 1 | SureVend™ is active and ring 1 |
AJP.TMRXX | a value between 1 and 99 in minutes. |
SureVend™ is active and ring 2
1. | Connect your portable data collection device (PDCD) in accordance with its | ||
| operating instructions. |
| |
2. | Press | . The display shows | while data is being |
| downloaded into your PDCD. |
|
| |
| Depending upon the setting selected in "Set Printer or DEX |
| ||
| Mode" on page 25, data may be cleared after the download is |
| ||
| SNSR |
| complete. |
|
3. | If there is a problem with your PDCD or its connection, several beeps sound | |||
| and the error message |
| appears briefly. Check your PDCD, | |
| connections, or consult your PDCD user’s manual. |
| ||
4. | CONTINUE.2 |
| DEXMODE |
|
| ABORTT.O. |
| ||
August, 2003 | Page 72 | 3280020 |