| WATER COOLER |
| SPECIFICATIONS |
| Cook and Cold Models |
| PHT1AQK, PST1AQK |
| and PHF1AQK |
Voltage | 115VAC +10%/1 PH/60 Hertz |
Size | |
Shipping Weight (Approx) | 60 lbs. (27kg) |
Cold Water Capacity* | .5 G.P.H. (1.9 L.P.H.) |
Compressor | 1/20 HP |
Compressor (Full Load) | 1.1 Amps |
Refrigerant | R 134a |
Refrigerant Charge | 1.875 oz. (53 grams) |
| Hot, Cook, and Cold Models |
| PHT1AQHK, PST1AQHK |
| and PHF1AQHK |
Voltage | 115VAC +10%/1 PH/60 Hertz |
Size | |
Shipping Weight (Approx) | 63 lbs. (29kg) |
Cold Water Capacity* | .4 G.P.H. (1.5 L.P.H.) |
Hot Water Capacity | 45/6 oz. (45/175ml.) cups |
Compressor | 1/20 HP |
Compressor (Full Load) | 5.5 Amps |
Refrigerant | R 134a |
Refrigerant Charge | 1.875 oz. (53 grams) |
*A.R.I. Ratings: Room Temperature 90°F(32°C); Supply Water Temperature 80°F (27°C); Drinking Water Temperature 50°F(10°C).
Specifications subject to change without notice.
**These units have been manufactured with R134a refrigerant. Repairs to the system must be performed by a Certified Refrigeration Technician only. Always refer to the data plate located on the base of the unit for the proper refrigerant and charge.
WARNING: A pressure regulator, such as a slow flow regulator, must be installed in front of the unit’s water inlet if the water pressure (including any possible pressure spikes) could exceed 100 P.S.I.G. (690 kPA). Failure to comply will void the warranty. The manufacturer accepts no liability for damage caused by excessive water pressure.
Do not use this drinking water system where the source water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit.
Page 2 of 11 |
