Storing DAB services in memory, To restore the FM/AM tuner

3 Start searching for an ensemble.

To search for ensembles of higher frequency

To search for ensembles of lower frequency

When an ensemble is received, searching stops.

To stop searching before an ensemble is

received, press the same button you have pressed for searching.

4 Select a service (either primary or secondary) you want to listen to.

To select the next service (If a primary service has some secondary services, they are selected before the next primary service is selected.)

To select the previous service (either primary or secondary)

To change the display information while tuning in to an ensemble

Normally service name is shown on the display. If you want to check the ensemble name or its frequency, press D (DISP).

Each time you press the button, the following information appears for a while in the main display.

Service name

Ensemble name

Channel number

Frequency

To tune in to a particular ensemble without searching

Before you start....

Press FM/AM (DAB) briefly if tape, CD changer, or external component is the current source.

1Press and hold FM/AM (DAB) to select DAB tuner as the source.

2Press FM/AM (DAB) repeatedly to select the DAB band (DAB1, DAB2, or DAB3).

3Press and hold ¢ or 4 for more than one second. “MANU” (manual) appears on the display.

4Press ¢ or 4 repeatedly until the ensemble you want is reached.

•If you hold down the button, the frequency keeps changing until you release the button.

5Press 5 (up) or ∞ (down) to select a service (either primary or secondary) you want to listen to.

To restore the FM/AM tuner

Press and hold FM/AM (DAB) again.