Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem, or the unit has been physically damaged, call a qualified person, such as your dealer for service.

Symptom

The unit does not turn on.

The unit does not operate using batteries.

Operation stops intermittently.

“Antenna Not Detected” appears on the tuner’s display.

“Acquiring Signal” appears on the tuner’s display.

No sound is heard.

Possible Cause

JVC PnP is not turned on.

Batteries are not installed or not installed properly.

AC adaptor and/or AC power cord is not connected properly.

Battery operation is not active if the AC adaptor is connected to the unit.

The batteries are exhausted.

Antenna is not connected to the unit.

JVC PnP is not attached correctly to the dock.

There are obstacles over or around the antenna.

Headphones are connected to the unit.

Action

Turn on JVC PnP.

Install batteries by matching the polarity.

Check the connection of both AC adaptor and AC power cord to the unit.

Disconnect the AC adaptor from the unit.

Replace the batteries.

Connect the antenna.

Make sure JVC PnP is attached correctly to the dock.

Change the position and direction of the antenna.

Disconnect headphones.

10

Page 10
Image 10
JVC KS-SB200 manual Troubleshooting