JVC KW-XC828 manual Listening to the radio, Searching for a station automatically Auto search

RADIO OPERATIONS

ENGLISH

DIRECTORY

EX

Listening to the radio

You can use either automatic searching or manual searching to tune in to a particular station.

Searching for a station automatically: Auto search

1 Select the band (FM1, FM2, FM3 or AM).

FM1FM2FM3 AM

Note:

This receiver has three FM bands (FM1, FM2, and FM3). You can use any one of them to listen to an FM broadcast.

Searching for a station manually: Manual search

1 Select the band (FM1, FM2, FM3, or AM).

FM1FM2FM3 AM

2 Press and hold ¢ or 4 until “M (manual)” starts flashing on the display.

2	Selected band appears.	3 Tune in to a station you want while
	Start searching for a station.
	To search stations of	“M” is flashing.
	higher frequencies
		Press ¢	to tune in
	To search stations of	to stations of higher
		frequencies.
	lower frequencies
		Press 4	to tune in
		to stations of lower
		frequencies.

When a station is received, searching stops.

To stop searching before a station is received,

press the same button you have pressed for searching.

•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.

•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz for AM) until you release the button.

8