Storing stations in memory

You can use one of the following methods to store broadcasting stations in memory.

Automatic preset: SSM (Strong-station Sequential Memory)

Manual preset

Storing your favorite station into the EX button

Automatic preset: SSM

You can preset 6 local stations in each FM band (FM1, FM2, and FM3).

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually.

EXAMPLE: Storing an FM station of 88.3 MHz into the preset channel number 1 of the FM1 band

1 Select the FM1 band.

ENGLISH

1 Select the band (FM1, FM2, or FM3).

FM1FM2FM3 AM

2 Press MODE repeatedly until “SSM” appears.

3 Press SEL.

2 Tune in to a station (in this example, of 88.3 MHz).

Press ¢ to tune in to stations of higher frequencies.

Press 4 to tune in to stations of lower frequencies.

3 Press and hold the number button (in this example, 1) for more than 2 seconds.

“--SSM--” appears, then disappears when automatic preset is over.

Local stations with the strongest signals are searched for and stored automatically in the band you have selected (FM1, FM2, and FM3). These stations are preset in the number buttons — No.

1 (lowest frequency) to No. 6 (highest frequency). When automatic preset is over, the station stored in number button 1 will be automatically tuned in.

“P1” flashes for a few seconds.

4 Repeat the above procedure to store other stations into other preset numbers.

9

Page 9
Image 9
JVC KW-XC828 manual Storing stations in memory, Automatic preset SSM, Manual preset, Select the FM1 band