•Only the existing characters will be shown on the search menu.
•Press and hold 5/∞ to continuously change the character of the search menu.
•If your phonebook contains many contacts, searching take some time.
Receiving/ending a phone callWhen a call comes in, the source is automatically changed to “BT FRONT/BT REAR.” “Receiving... [Phone number/name]” appears on the display.
•The display will flash in blue. (<Ring Color>,
32)
The unit answers the incoming calls automatically, 
20.
•Press 
or the control dial to answer the incoming call when <Auto Answer> is deactivated.
•Press 5/∞ to adjust the microphone volume
(1 – 3) during a phone call conversation. To preset the microphone volume, 
20.
•Press 4
/¢
to turn on/off the
Noise Reduction and Echo Cancelation mode. To preset, 
20.
To end a call or reject an incoming call, press
and hold 
or the control dial.
Press the control dial during a phone call conversation, then continue your conversation using the other media.
•Operations may be different according to the connected Bluetooth device.
You can switch the current connected mobile phone to the last connected mobile phone.
[Hold]
Phone icon appears and “Connecting” flashes on the display. When the last connected phone is being reconnected again, “Connected [Device Name]” appears on the display. Now you can use the last connected mobile phone with the unit.
Arriving of a text messageWhen a text message comes in, the unit rings if your mobile phone is compatible with text message and <Message Notice> is set to <On>. (
20)
•“Received Message” appears on the
display and the display illuminate in blue. (<Ring Color>, 
32)
•You cannot read, edit, or send a message through the unit.
Using the remote controller
5 U/D ∞/2 R/F 3/ : Answers calls
SOURCE
5 U/D ∞/2 R/F 3/ : Rejects calls
SOURCE
[Hold]
:Switches the conversation media (between the unit and mobile phone) during a phone call conversation
18ENGLISH