Category
Audio
DisplayMenu item | Selectable setting, [ Initial: Underlined ] |
| ||
HPF | Select the cutoff frequency to the front/rear speakers. Set this to | |||
High Pass | match the LPF settings. |
|
| |
Filter | • 62Hz/95Hz/ | : Frequencies lower than 62 Hz/95 Hz/135 Hz are cut | ||
| 135Hz | off. |
|
|
| • Off | : All signals are sent to the front/rear speakers. |
| |
|
|
|
|
|
Beep | • On | : Activates the keypress tone. |
|
|
Keytouch tone | • Off | : Deactivates the keypress tone. |
|
|
|
|
|
|
|
Amplifier | • High Power | : Vol 00 – Vol 50 |
|
|
Gain*6 | • Low Power | : Vol 00 – Vol 30 (Select if the maximum power of | ||
|
| each speaker is less than 50 W to prevent damaging | ||
|
| the speakers.) |
|
|
Dimmer | • Auto | : Dims the display when you turn on the |
| |
|
| headlights. *7 |
|
|
| • On | : Dims the display and button illumination. |
| |
| • Time Set | : Set the timer for dimmer. ( | 38) |
|
| • Off | : Cancels. |
|
|
|
|
|
| |
Level Meter | • Meter 1 | : Selects the different level meter patterns. ( | 6) | |
| • Meter 2 | • Press DISP to show the selected level meter. |
| |
|
|
|
| |
Scroll *8, *9 | • Once | : Scrolls the displayed information once. |
| |
| • Auto | : Repeats scrolling (at |
| |
| • Off | : Cancels. |
|
|
| Pressing DISP for more than one second can scroll the display |
| ||
| regardless of the setting. |
|
| |
|
|
|
| |
Tag Display | • On | : Shows the Tag information while playing MP3/ |
| |
|
| WMA/WAV tracks. |
|
|
| • Off | : Cancels. |
|
|
|
|
|
|
|
LCD Type | • Negative | : Negative pattern of the display. |
|
|
| • Positive | : Positive pattern of the display. |
|
|
| • Auto | : Positive pattern will be selected during the day |
| |
|
| time*10, while negative pattern will be used during | ||
|
| the night time*10. |
|
|
*6 | The volume level automatically changes to “Vol 30” if you change to <Low Power> with the volume |
| level set higher than “Vol 30.” |
*7 | The illumination control lead connection is required. (See “Installation/Connection Manual.”) |
*8 | Some characters or symbols will not be shown correctly (or will be blanked) on the display. |
*9 | Not applicable to HD Radio text scrolling. |
*10 | Depends on the <Dimmer> setting. |
ENGLISH 33