18
Display the built-in color bars signal at the camera on the monitor to perform color/contrast/brightness
adjustment.
3. Setting and Adjustment During Shooting

External Monitor Adjustment

1.
Connect the color video monitor to the [VIDEO OUT] of this
unit.
2.
Press the [BARS] button to output the color bars signal
(SMPTE-compliant color bars).
3.
With the color bars displayed, turn [BLUE CHECK] at the moni-
tor to ON.
Screen turns into a monochrome of blue and color bars ap-
pear as blue stripes.
4.
Turn the [CHROMA] adjustment knob on the monitor and ad-
just color bars 1 and 8, 7 and $ to the same brightness level.
5.
With [BLUE CHECK] in the ON mode, turn the [PHASE] ad-
justment knob on the monitor to adjust color bars 3 and 0, 5
and @ to the same brightness level.
6.
If brightness of color bars 1 and 8, 7 and $ vary upon [PHASE]
adjustment, repeat chroma adjustment as in step
4.
.
7.
Turn [BLUE CHECK] at the monitor to OFF and return to the
normal screen (R, G and B are all displayed).
8.
Adjust using the [BRIGHT] adjustment knob on the monitor
such that color bars * and ( disappear and ) becomes vis-
ible.

9.

Upon completing the adjustment, press the [BARS] button again
to return to the normal screen.
12345 6 7
890 B C DA
EF G HIJK

2., 9.

[BARS] button
1: White
2: Yellow
3: Cyan
4: Green
5: Magenta
6: Red
7: Blue
8: Blue
9: Black
0: Magenta
!: Black
@: Cyan
#: Black
$: White
%: Black
^: White
&: Black
MENU
AW BARS
SET
LENS
REMOTE
GENLOCK IN VIDEO OUT
POWER
DC IN
SEE INSTRUCTION MANUAL
1.

3.~8.