PICTURE FEATURES
Refer to “Setting the TV” (see page 36) for details of displaying the menu.
PICTURE FEATURES
| DIGITAL VNR |
| AUTO |
|
| DigiPure Pro |
| AUTO |
|
| COLOUR SYSTEM |
|
|
|
| MOVIE THEATRE |
| AUTO | |
| 4:3 AUTO ASPECT |
|
|
|
| PICTIRE TILT |
|
|
|
OK
•COLOUR SYSTEM cannot be chosen when watching Digital terrestrial broadcasting
DIGITAL VNR
The DIGITAL VNR function cuts down the amount of noise in the original picture. You can choose from the three DIGITAL VNR function settings of AUTO, MIN and MAX.
The TV and external input may be given different DIGITAL VNR settings.
AUTO:
The TV will automatically adjust the level of the DIGITAL VNR effect to match the amount of noise in the picture, giving you the best possible picture.
•If you set the DIGITAL VNR effect too high it can make the picture less sharp. It is recommended to use the AUTO setting if you can.
MIN:
The level of the DIGITAL VNR effect is set to the minimum. If you set the DIGITAL VNR function to AUTO but feel that the sharpness of the original picture has not been reproduced fully, change the setting from AUTO to MIN.
•The MIN setting is not suitable for low- quality pictures which contain a lot of noise.
MAX:
The level of the DIGITAL VNR effect is set to the maximum. If you set the DIGITAL VNR function to AUTO but still notice some noise, change the setting from AUTO to MAX.
•The MAX setting is not suitable for high- quality pictures which contain very little noise.
OFF:
The DIGITAL VNR function is turned off.
DigiPure Pro
The DigiPure Pro function uses the latest in digital technology to give you a natural- looking picture.
DigiPure function:
This function helps to create a natural- looking picture by eliminating unnecessary edges from
You can choose from the three DigiPure function settings of AUTO, MIN and MAX. The TV and external input may be given different DigiPure settings.
•If you set the DigiPure effect too high on a
Picture motion compensation function:
This function displays
•The effect level of the picture motion compensation function cannot be changed. The effect level is the same no matter which of the AUTO, MIN or MAX settings is used.
1Choose DigiPure Pro
2Press the 5 buttons to choose a setting. Then press the a button
AUTO:
The TV will automatically adjust the level of the DigiPure effect to match the amount of noise in the picture, giving the best possible picture.
MIN:
The level of DigiPure effect is set to the minimum. When you set the DigiPure Pro function to AUTO and notice some noise, change the setting from AUTO to MIN.
•The MIN setting is not suitable for high- quality pictures which contain very little noise.
38