Sound Adjust

Sound Settings

These settings allow you to change and adjust the sound on your television.

Bass – You can increase or decrease the level of low-frequency sound in the TV’s audio with the bass adjustment.

Treble – Use treble to adjust the level of high-frequency sound in your TV’s audio.

Balance – Adjust the level of sound between the TV’s left and right speakers with the balance setting.

Adjust the Sound Settings

 

Press the MENU button

π†

To "Sound Adjust"

è

To enter

π†

To "Bass", "Treble" or "Balance"

® To adjust the setting

π† To move to the next setting

Press the MENU button when finished

Sound Adjust

Bass

 

0

 

 

 

 

 

Treble

 

0

 

 

 

 

 

Balance

 

0

 

 

 

 

 

 

 

 

 

 

 

Optical Out

 

 

 

 

 

 

 

PCM

 

Turn On Volume

 

 

 

 

 

 

 

 

 

 

Current

 

Volume Limit

 

 

 

 

 

 

 

 

 

 

30

 

 

 

 

 

 

 

Reset

 

 

 

 

BACK

 

 

MENU

Select

 

 

Operate

Back

 

 

Exit

 

 

 

Notes:

You can reset all sound adjustments you set at once as the default setting when you select reset. See page 49.

Optical Out

You can select the optical digital sound output, either PCM or DOLBY DIGITAL when your TV is connected to an amplifier that has DOLBY DIGITAL decoder. If you select DOLBY DIGITAL, you can enjoy listening in 5.1ch sound when watching digital broadcasts. This only effects digital channels.

Press the MENU button

π† To "Sound Adjust" √® To enter

π† To "Optical Out"

è To select "PCM" or "DOLBY DIGITAL" Press the MENU button when finished

Sound Adjust

 

 

Bass

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Treble

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Balance

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Optical Out

 

 

 

 

 

PCM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Turn On Volume

 

 

 

 

 

Current

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Volume Limit

 

 

 

 

 

30

 

 

 

 

 

 

 

 

 

 

Reset

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BACK

 

MENU

 

Select

Operate

 

Back

 

Exit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes:

If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don't select PCM, it cannot output the sound from the speakers.

For connecting an amplifier using the optical output, see page 20.

You cannot output sound from your Optical Output connection if the audio source is from your HDMI device.

Manufactured under license from Dolby Laboratories. "Dolby", and the double-D symbol are trademarks of Dolby Laboratories.

50