Button Functions

Volume +/–

Use these buttons to raise or lower the TV’s volume level. The maximum is the level you set in Volume Limit. See page 51.

Return +/TV

The Return+/TV button has two functions:

Return - Returns to the channel viewed just before the channel currently onscreen.

Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons.

TV - Returns to the TV mode.

Press the RETURN+/TV and hold for three seconds

Return Channel (123-456)

Programmed !

The channel currently active has been programmed as your return+ channel. Now scan

through the channels using the CHANNEL+/- buttons.

Press the RETURN+/TV

You will return to your programmed channel.

•To cancel your return+ channel, press and hold the RETURN+/TV button for three seconds. The message “Return Channel Cancelled !” will appear.

•Return+ works only with the CHANNEL+/- buttons. Pressing any number key will cancel return+.

Sound

By pressing the SOUND button, you can change the A.H.S. (Advanced Hyper Surround) and Smart Sound on or off.

A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more effect.

Smart Sound - Decreases high sound levels, giving a regulated sound level.

Press the SOUND button

π† To select "A.H.S." or "Smart Sound" √® To choose the setting

Press the MENU when finished

Sound Effect

A.H.S.Off

Smart Sound

On

 

OK

MENU

Select Operate Exit

Note:

• Smart Sound may become an unnatural effect, depending on the signal source.

Muting

The MUTING button instantly turns the volume down completely when you press it. Press MUTING and the volume level will instantly go to zero. To restore the volume to its previous level, press MUTING again.

58