JVC LET0213-001A Resuming playback, To memorize the interrupted position, To resume playback

Basic operations

Basic operations

Resuming playback

The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position next time you press 3.

To memorize the interrupted position

1Set the “RESUME” setting on the “SYSTEM” page of the preference display to “ON.”

(See page 49 for details about how to set.)

2At the position you want to interrupt playback, press 7, or press DVD STANDBY/ON on the

remote control or STANDBY/ON on the front panel.

The unit memorizes the interrupted position.

•Even if you interrupt playback by pressing 7 in step 2 above and then turn off the power, the memory is not cleared.

To resume playback

■While the disc you interrupt playback last time is still in the disc tray

Press 3.

The unit starts playback from the position where you interrupted playback last time.

•To clear the resume position memory Carry out one of the followings.

*Take out the disc from the disc tray. *Press 7 while stopped.

*Turn on the unit by pressing DVD STANDBY/ON (on the remote control) or STANDBY/ON (on the front panel).

NOTES

•The resume function does not work with Audio CD and MP3 discs.

•The resume function does not work if “RESUME” on the “SYSTEM” page of the preference display is set to “OFF.”

•In the case of a Video CD/SVCD disc with PBC function, the unit may resume playback from a point slightly earlier than the resume point you stored.

•The resume function does not work in the program or random mode.

24