JVC LPT1081-001A manual Stop S

Symptom			Remedy
Playback
The unit does not play back the disc.		• No disc is inserted.
		• A blank disc is inserted.
		• The disc is upside down. Insert the disc with the labelled side facing up.
		• The disc is not correctly inserted.
		• The unit cannot play back certain discs (such as a CD-ROM). (See page 33.)
		• The region codes on the DVD-Video and the unit are not matched. (See page
	33.)
		• Moisture has condensed inside the unit. Remove the disc and leave the unit
		turned on for about two hours until the moisture evaporates. (See page 3.)
		• The unit cannot play back the disc if it was recorded on another recorder and
		not finalised. (See page 31.)
Playback image freezes for a		• During the playback of a two layered disc, the picture may freeze for a moment
moment.		while playback switches from the first to the second layer. This is not a
		malfunction.
The unit does not play back the disc		• Resume playback is activated. (See page 37.) Press [STOP S] twice.
from the beginning.		• You have inserted a disc whose title menu or DVD menu automatically
		appears on the TV screen when it is first inserted.
The unit starts playing back the disc		• The DVD-Video features an auto playback function.
automatically.
Some functions such as Stop,		• Depending on the disc, you may not be able to perform some of those
Search, or Slow-motion Playback		operations. See the instruction manual supplied with the disc.
cannot be performed.
The language for the sound track		• Multilingual tracks are not recorded on the DVD-Video, DVD-R, or DVD-RW
cannot be changed.		being played back.
		• The DVD-Video prohibits the changing of the language for the sound track.
		• Try changing the language using the DVD-Video menu.
The subtitle language cannot be		• Multilingual subtitles are not recorded on the DVD-Video.
changed or turned off.		• The DVD-Video prohibits changing the subtitles.
		• Try changing the subtitles using the DVD-Video menu.
Angles cannot be changed.		• Multi-angles are not recorded on the DVD-Video being played back.
		• You can change the angle only if the disc contains multi-angle scene. Angles
		can be changed only when the multi-angle scene appears on the screen.
		• The DVD-Video prohibits changing angles.
		• Try changing the angle using the DVD-Video menu.
Recording / Timer recording / Editing
The channel cannot be changed		• Set the TV input to “TV.”
from the channel you are recording.
Recording does not start		• An unused DVD-R or DVD-RW was inserted. It takes a while for the unit to
immediately after pressing [REC I].		automatically format a DVD-RW.
Nothing was recorded even though		• There was a power failure during recording.
you set the timer setting correctly.		• The unit’s internal clock stopped due to a power failure that lasted for more
		than 30 seconds.
		• Reset the clock. (See page 19.)
		• Unplug the mains cable from the AC outlet and plug it in again.
		• The programme contains copy protection signals that restrict copying.
		• The timer setting overlapped with another setting that was set later or has
		priority.
Recording does not stop		• It will take a few seconds for the unit to send data to disc before recording can
immediately after you press		stop.
[STOP S].
Timer recording is not complete or		• The timer setting overlapped with another setting that was set later or has
did not start from the beginning.		priority. (See page 29.)
		• There was not enough disc space.
Timer recording is not possible.		• Make sure	icon appears on the front panel display of this unit. If not, press
		[STANDBY/ON	y/I].
Others
The unit does not operate correctly.		• If static electricity or anything else causes the unit to operate abnormally,
		unplug the mains cable and plug it in again.
The disc tray does not open when		• It may take a few seconds for the disc tray to open after you have recorded or
you press [OPEN/CLOSE O].		edited a disc.
		• This is because the unit is sending data to the disc.
“Repairing” appears on the display.		• If a power failure occurs or the mains cable is unplugged during recording,
		finalising, formatting or editing (even after “Wait for a moment.” message
		disappeared), a repairing process will begin automatically when the unit is
		turned on next time.It may take several minutes up to about four hours.

*If the above remedies do not solve the problem, please call the service centre for help.

Others

EN 61