JVC LST0103-001B

CF memory card or

LAN card

KA-DV5000

Card slot

EJECT button

Caution

●Make sure the power of GY-DV5000 is off when inserting/

removing a CF memory card/LAN card. Inserting/removing

a card with the unit power on may damage the data storage

section of the CF memory card or the card itself.

●Do not use the wireless LAN card continuously for more

than 48 hours.

LCD screen

Card status display

: No card

: LAN card

: CF memory card

Inserting card

Turn off the GY-DV5000 power.

Press and hold the lock release button and open the cover.

Insert a card into the KA-DV5000 card slot. Then, close the cover.

●The cover may not close depending on the wired LAN card or the card shape. In this case, remove the cover by pressing section

A and pulling on the cover.

Turn on the GY-DV5000 power.

Turn on the KA-DV5000 power.

●Card status according to the inserted card type is displayed on

the LCD screen/viewfinder screen. (☞ page 4)

(The viewfinder will show the status in black and white.)

Memo

When turning the power on, the card status

display shown on left will flash during initial-

ization.

Introduction Inserting/removing CF memory card/LAN card

●The KA-DV5000 accepts the following cards for which operation has

been confirmed: (As of August 2002)

Operating voltage 3.3 V

Current consumption Max. 500 mA

• Wired LAN-card

US: EA2900-117 (Revision C) (Name of manufacturer: Socket

Communications, Inc)*1

Europe: EA2903-162 (Revision C) (Name of manufacturer: Socket

Communications, Inc)*1

Asia: EA2906-194 (Revision C) (Name of manufacturer: Socket

Communications, Inc)*1

* Revision indicated on the upper right of package production label.

• Wireless LAN-card

TEW-201PC

TEW-202CF

TEW-PC16 (firmware version 0.8.3 or later) (Name of manufacturer:

TRENDware)

WCF11 (Name of manufacturer: LINKSYS)*2

AIR-PCM350

(Name of manufacture: Cisco Systems)

FCCID: LDK102040

• CF (Compact Flash) card

SDCFB-16 ~ SDCFB-256 (Name of manufacturer: SanDisk)*1

*1: Use PCMCIA card TYPE 1 or TYPE 2 adapter

*2: Use PCMCIA card TYPE 2 adapter

Lock release button

Cover

Section A

For the latest operational check card, visit the website below

or contact your JVC dealer.

http://www.jvc-victor.co.jp/english/pro/prodv/

Removing card

Turn off the GY-DV5000 power, or turn off the KA-DV5000 power.

Open the cover, press the EJECT button of KA-DV5000 and remove the card.