3 Connecting the alarm cable (A

Page 25)

Connect the alarm cable and wind the waterproof tape (adhesive).

After connecting, push the cable into the arm of the camera.

Arm

Wind the waterproof tape (adhesive)

Note:

●For cables that are not used, be sure to wrap the ends individually with insulating tape.

●For safety reasons, turn on the power only after all the connection is complete.

4 Mount the cap

5 Seal the cable connection hole and around the mounting surface of the camera with waterproof seal (GE silicon).

4

Cap

5

Waterproof treatment

Note:

●Ensure that waterproof treatment is performed. Otherwise, the camera may malfunction due to rain water seepage.

●Use GE silicon or other similar product for the sealing material.

6 Remove the dome cover protective sheet

Protective sheet

29