IP address setting at the computer
Set the computer to an IP address that enables communication with the camera. Procedures described in this item are intended for Windows XP users.
1.Click [Start]
●Select in the sequence of [Control
Windows Vista :
●Select in the sequence of
2.The computer on which Internet Explorer is launched automatically selects the connected network
●
●Check to ensure that the [Client for Microsoft Networks] and [Internet Protocol(TCP/IP)] check boxes are selected.
Windows Vista :
●Check to ensure that the [Microsoft Network Client] and [Internet Protocol Version 4 (TCP/IPv4)] checkboxes are selected.
3.Select [Internet Protocol(TCP/IP)] and click [Properties]
Windows Vista：Select [Internet Protocol Version 4 (TCP/IPv4)], and click [Properties]
4.Set the IP address
A Select [Use the following IP address].
BSpecify the [IP address]. (For example, use 192.168.0.100)
Memo:
Make sure that you take note of the original IP address before altering.
Note:
Ensure that a duplicate IP address is not specified within the same network environment.
CSet [Subnet Mask] to a value that is appropriate for the setting operation. Consult the network administrator if you have any queries. (Use 255.255.255.0 when the camera is in its default settings.)
DWhen a [Default Gateway] is present, make use of the corresponding IP address (e.g., 192.168.0.254).
EClick
5.Click [OK] on the ALocal Area Connection PropertiesB screen
7