(TV) is applicable to
Title Bar | For setting display items on the viewer screen. | |
|
| For the MPEG4 Viewer, characters are displayed in the title bar of the |
|
| window. |
|
|
|
| A Camera ID | Select AOnB to display [Camera ID]. |
|
| [Camera ID] can be specified on the [Basic Settings1] or [Camera] page |
|
| of the camera. |
|
| |
|
|
|
| B Position Title | Selecting AOnB displays the Position Title. |
| (TX) |
|
|
|
|
| C Time | Select AOnB to display the time. |
|
|
|
| D Format | Select the format for displaying time. |
|
| YYYY, MM, and DD denote year, month and day respectively, while HH, |
|
| MM, and SS denote hour, minute and second respectively. mm is |
|
| equivalent to 1/100 seconds. |
|
|
|
Stream Settings For specifying settings for receiving MPEG4 stream.
A Stream | For selecting the protocol when the viewer acquires data from the |
| camera. |
| When AHTTPB is selected, lost packets are recovered via resending. |
| Camera may be monitored using multiple viewers when |
| AMulticastB is selected. |
| When playing back via multicast., start multicast sending on the |
| [Streaming] page of the camera unit. |
Note:
●When the
●If AblockB is selected, the Windows firewall will block the multicast stream and playback of multicast by the viewer will fail.
B HTTP Port You can change the HTTP port number. The default port number setting is 80.
Specify the same value as the parameter that is set on the [Protocol] page of the camera. (A Page 47)
C Multicast IP You can change the multicast IP address.
Address The default address is 225.0.2.1.
D Multicast Port You can change the multicast port number. The default port number setting is 59152.
This is enabled when [Start] is selected for the [MPEG4 Control] item on the [Streaming] page.
Specify the same value as the parameter that is set on the [Streaming] page of the camera. (A Page 48)
77