Receive

 

For specifying settings related to receiving of audio sound sent from the

 

 

 

 

camera.

 

 

 

 

 

 

 

A Receive

 

For specifying whether to receive audio sound. Select AOnB to receive

 

 

 

 

audio sound.

 

 

 

 

 

 

 

B Stream

 

For selecting the stream format of the received audio sound.

 

 

 

 

When AHTTPBis selected, lost packets are recovered via resending. When

 

 

 

 

AMulticastBis selected, you can monitor the audio sound of the camera

 

 

 

 

using a multiple number of client PCs. During receiving via multicast., start

 

 

 

 

multicast sending on the [Streaming] page. (A Page 48)

 

 

 

 

Note:

 

 

 

 

 

 

 

 

 

 

●When the built-in viewer is launched with AMulticastB specified, a

 

 

 

 

Windows firewall warning may appear. In this case, select AunblockB and

 

 

 

 

proceed.

 

 

 

 

● If AblockB is selected, the Windows firewall will block the multicast

 

 

 

 

stream and playback of multicast by the viewer will fail.

 

 

 

 

 

 

 

 

 

 

 

 

C Multicast IP

 

You can change the multicast IP address.

 

 

Address

 

The default address is 225.0.3.1.

 

 

 

 

Specify the same value as the parameter that is set on the [Streaming]

 

 

 

 

page of the camera. (A Page 48)

 

 

 

 

 

 

 

D Multicast Port

 

You can change the multicast port number.

 

 

 

 

The default port number setting is 39152.

 

 

 

 

Specify the same value as the parameter that is set on the [Streaming]

 

 

 

 

page of the camera. (A Page 48)

 

 

 

 

 

 

 Speech

 

For specifying settings for sending audio sound to the camera from the

 

 

 

 

computer.

 

 

 

 

 

 

 

A Destination

 

You can change the destination port for sending audio sound to the camera

 

 

Port

 

from the computer. The default port number setting is 49298

 

 

 

 

 

 

 Common

 

For specifying the HTTP port settings

 

 

 

 

 

 

 

A HTTP Port

 

For changing the port number during access to the camera from the client

 

 

 

 

PC via HTTP.

 

 

 

 

The default port number is 80.

 

 

 

 

Specify the same value as the parameter that is set on the Protocol.

 

 

 

 

(A Page 47)

 

 

 

 

 

 

 

79