Source Menu
By pressing “
” or “
” button, select the fifth icon. Source menu appears on the screen.
Use “
” or “
” button to select a mode and
then press “
” or “OK” button to switch to that mode. You can also switch your TV to EXT modes by pressing directly to “AV” button.
Other Features
TV Status
Programme Number, Programme Name and Sound Indicator are displayed on screen after programme change for 3 seconds.
This information is also displayed by press-
ing the “ ” button. Pressing this button again shows the current time. Pressing this button once more removes the
To Display the Time
While watching a TV programme with teletext
transmission, press “ ” button twice. The current time information captured from teletext will be displayed on the screen.
If the programme being watched does not have teletext transmission, no time information will be displayed.
The time information will disappear after pressing the “ ” button again.
Sound Indicator
“” button is used to select Mono or Ste- reo, or Dual I or Dual II.
0RQR
In Mono broadcast or in forced-mono (for stereo broadcast).
6WHUHR
In Stereo broadcast.
'XDO,
If dual broadcast is detected. Dual I is selected in default and also can be selected after Dual II by Remote Control.
'XDO,,
If Dual II is selected by Remote Control.
Hyper Sound
By selecting Hyper Sound in sound menu or
by pressing the “ 
” button on your remote control, Pseudo/Spatial effect can be turned on or off.
In Mono transmission the left and right channels will be added at left channel and dummy stereo effect will be introduced to
In stereo transmission it yields a phase difference between left and right channels.
Picture Mode
Picture mode OSD is displayed when BLUE button is pressed. Picture mode can be changed to Manual, Bright, Standard and Soft.