To Stop Automatic Page Change
The teletext page you have selected may contain more information than what is on the screen; the rest of the information will be displayed after a period of time.
•Press “
” button to stop the automatic page change.
•Press “
” button again to allow the next page to be displayed.
To Select a Subcode Page
Subcode pages are subsections of long Teletext pages that can only be displayed on the screen one section at a time.
•Select the required Teletext page.
•Press “
” button.
•Select the required subcode page number by pressing four digit buttons (e.g. 0001).
•If the selected subcode page is not displayed
in a short time, press “
” button. TV programme will be displayed on the screen.
•Teletext page number will be displayed on the upper left corner of the screen when the selected page is found.
•Press “
” button to display the selected Teletext page.
To exit Teletext
•Press “
” button. The screen will switch to TV mode.
Fastext and Toptext
Your TV supports the 7 page Teletext system. When the page number of any of the 7 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically.
•Press “
” button to move the Teletext screen forward one page at a time.
•Press “
” button to move the Teletext screen backward one page at a time.
For Fastext and Toptext
The subject-heading for the information may have a particular colour.
•Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly.
For TOPTEXT
If Toptext transmission is present, colour coded buttons will appear in status row.
If Toptext transmission is not present, status row will not appear.
In Toptext mode the “
” or “
” commands will request the next or previous page respectively. If Toptext transmission is not avail- able, in case of operation of these commands, wraparound occurs. For example page 100 appears to be one greater than page 199.
PeripheralEquipment
Connections
There is a wide range of audio and video equipment that can be connected to your TV.
Connection diagrams at the end of this section show you where the different equipment should be connected at the back side of the TV.
Via the Euroconnector
Your TV set has one Euroconnector socket. If you want to connect peripherals (e.g. video, decoder, etc.) which have Euroconnectors, to your TV, use
If an external device is connected via Euro- connector socket, TV is switched to AV mode automatically.
RGB mode
If an equipment can output the RGB signals, connect it to the EXT-1 terminal.
Via the RCA jacks
If you have an equipment (such as a Cam- corder) which has the RCA jacks, connect it to the