Sleep Timer
Sleep Timer mode OSD is displayed when YELLOW button is pressed. See page 14 for detailed information.
Mute Indicator
It is placed in the upper right side of the screen when enabled, and it stays there until it is dis- abled.
To cancel mute, there are two alternatives; the
first one is by pressing the “
” button, this volume is set to the preceding value, and the second one is increasing or decreasing the volume level.
Volume Bar
It is displayed in the lower middle of the screen. When a volume command is received (press-
ing “
+” or “
EXT Modes
By pressing the “AV” button you can switch your TV to EXT modes (except being in Tele- text). Pressing this button consecutively will switch the TV in one of the optional EXT modes:
In order to quit the EXT mode press any digit
buttons or “
” or “
”.
Zoom Modes
Zoom mode can be changed by pressing Red button. You can change the screen size according to the picture aspect ratio. Select the optimum one from the following ZOOM modes: Auto, 4:3 and 16:9.
AUTO
When a WSS (Wide Screen Signalling) sig- nal, which shows the aspect ratio of the pic- ture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode to 4:3 or 16:9 according to the WSS signal.
•When the AUTO mode does not function cor- rectly due to poor WSS signal quality or when you want to change the ZOOM mode, change to another ZOOM mode manually.
PCMode
Installation
•Power off both Computer and Display before making any connections.
•Set your PC’s resolution correctly before con- necting to the TV. See the table in page 25 for supported modes.
•Use a
•Tighten the screws of the Display cable until the connectors are fastened securely (fin-
Menu System in PC mode
Press the “MENU” button. The menu will be displayed in the middle of the screen.
PC Picture Menu
By pressing “ ” or “ ” button, select the first icon. PC Picture menu appears on the screen.