signal, connect it to the EXT-3 terminal with a component video cable.

Via the ANT (aerial) socket

If your equipment does not have an Eurocon- nector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment.

To store the test signal that comes from the equipment, see “Install Menu” on page 18 and store it to the program number 0. You can watch images from that equipment to select the program number which you stored the test signal.

Decoder

Cable TV offers you a wide choice of programmes. Most of them are free, others are to be paid for by the viewer. This means that you will need to subscribe to the broad- casting organisation whose programmes you wish to receive. This organisation will supply you a corresponding decoder unit to allow the programmes to be unscrambled.

For further information ask your dealer. See also the booklet supplied with your decoder.

Connect a decoder with an aerial socket to the TV

• Connect the aerial cable.

Connect a decoder without an aerial socket to the TV

Connect the decoder to your TV with a eurocable (RCA Jack Cable) to EXTERNAL (RCA Jack). When your decoder has a Euroconnector / RCA Jack you can obtain better picture quality if you connect a eurocable (RCA Jack Cable) to EXTERNAL (RCA Jack).

TV and Video Recoder (VCR)

Connect the Video Recorder to the ANT (an- tenna input) socket of the TV with the aerial cable.

Connect the Video Recorder to the EXT-1 or EXT-2 terminal with the SCART cable, or con- nect it to the EXT-4 terminal with the audio and video cables.

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press “AV“ button to select the corre- sponding AV mode.

INTSC 3.58/4.43 system is detected automati- cally in AV mode.

Camera and Camcorder

To connect to the EXT-4 terminal

Connect your camera or camcorder at the back side of your TV.

Connect your equipment to the TV via VIDEO (yellow), AUDIO R (red) and AUDIO L (white) inputs. You should connect the jacks to the input in the same colour.

Connect the decoder to the video recorder

Some video recorders have a special euro- connector for decoder.

Connect a eurocable to the euroconnector of your decoder and to the special eurocon- nector of your video recorder. See also the handbook of your video recorder.

To connect your video recorder to the TV, see TV and Video Recorder section.

If you want to connect more equipment to your TV, consult your dealer.

Connecting Headphones

Use the stereo headphone socket on the right side of your TV, to connect headphones.

Connecting the PC

Connect PC monitor with 15-pin PC cable to the 15-pin connector on the rear of the com- puter. For detail installation procedure see In- stallation in PC mode.

To connect to S-Video input

Connect your camera or camcorder at the back side of your TV.

Connect your equipment to the TV via S-Video input at the back side by using S-Video cables.

ENGLISH - 27 -

Page 28
Image 28
JVC LT-20A60SU manual Via the ANT aerial socket, Decoder, TV and Video Recoder VCR, Ntsc Playback, Connecting Headphones