SET UP menu

1Press the 5or 6buttons to choose an EXT terminal

„DUBBING

You can choose a signal source to be output from the EXT-2 terminal.

> EXT SETTING

EXT-1DUBBING

EXT-2

EXT-3

TV

OK

D0020-EN

•Setting S-IN (S-VIDEO input) changes the head character from “E” to “S”. When an EXT terminal receives a normal video signal, “E2” appears on the display. This changes to “S2” when it receives an S- VIDEO signal.

•Even a device which can output an S-VIDEO signal (Y/C signal) may output a regular video signal (composite signal) depending on the device setting. If a picture cannot appear because the S-IN (S-VIDEO input) setting has been made, read the device instruction manual carefully again to check for the device settings.

You can do this with the output signals of the devices connected to other EXT terminals, or with the picture and sound from a TV channel you are currently viewing.

1Press the 5buttons to choose the arrow from the menu

> EXT SETTING

EXT-1DUBBING

EXT-2

EXT-3

TV

OK

D0022-EN

2Press the 6buttons to choose an

EXT terminal or TV.

Then press the a button

The arrow in the menu represents a signal flow. The left side of the arrow shows a signal source output from the EXT-2 terminal.

EXT-1/EXT-3:

The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal.

TV:

The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal.

38