Setting up your TV

Connecting the power cord to the AC outlet

Insert the AC plug on the power cord from the TV into an AC outlet.

Caution

•Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit.

•Remove the AC plug from the outlet to completely disconnect the TV from the power supply.

Putting the batteries into the remote control

Use two AA/R6 dry cell batteries.

Insert the batteries from the -end, making sure the +and -polarities are correct.

•Follow the warnings printed on the batteries.

•Battery life is about six months to one year, depending on how much you use the remote control.

•The batteries we supply are only for setting up and testing your TV, please replace them as soon as you need to.

•If the remote control does not work properly, replace the batteries.

Initial settings

When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo. Follow the instructions on the screen display to make the initial settings.

# button

VCR/TV/DVD

switch

Yellow button Blue button

7 buttons

1Make sure to set the VCR/TV/DVD switch on the remote control to the TV position

•You cannot turn the TV on when the VCR/TV/DVD switch is set to the VCR or DVD position.

2Press the # button on the remote control

The TV turns on from standby mode and the JVC logo is displayed.

•Check that the AC plug on the power cord from the TV is connected to AC outlet.

Remote control

Power lamp

sensor

 

7