Source Menu

You can switch your TV to EXT modes by pressing directly to “AV” button or by selecting in source menu from the main menu.

While in EXT mode, you can also switch your TV to TV or other EXT modes by selecting in source menu from the main menu.

In main menu, firstly use “” or “” button

then use “” / “” or “OK” button to enter Source menu. In source menu, move the cursor by “” or “” button and then press “OK”

button or “” / “” buttons when the cursor is on the required item. The selected mode comes automatically on the screen.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿

￿￿￿￿￿

￿￿￿￿￿

￿￿￿￿￿￿￿

￿￿￿￿￿

￿￿￿

￿￿￿￿￿￿￿

￿￿

Other Features

TV Status

Programme Number, Programme Name (or EXT), (they are displayed on the upper left of the screen). The sound indicator is displayed with them too. They are displayed after programme change for 3 seconds.

Sound Indicator

The alternatives of the indicator are Mono, Ste- reo, Dual I and Dual II. This indicator is displayed under the programme number indicator on the screen. “I-II” button is used to select Mono or Stereo, or Dual I or Dual II.

0RQR

In Mono broadcast or in forced-mono (for stereo broadcast).

6WHUHR

In Stereo broadcast.

'XDO￿,

If dual broadcast detected. Dual I is selected in default and also can be selected after Dual II by Remote Control.

'XDO￿,,

If Dual II is selected by Remote Control.

Hyper Sound

By selecting Hyper Sound in sound menu or by pressing the “ ” button on your remote

control, Pseudo/Spatial effect can be turned on or off. In Mono transmission the left and right channels will be added at left channel and dummy stereo effect will be introduced to end-user.

In stereo transmission it yields a phase difference between left and right channels. Hyper Sound selection will be displayed on the screen when the TV Status button is pressed or programme is changed.

ENGLISH - 20 -