In EXT mode, Install menu appears like this:

Decoder(EXT-2)

 

 

 

 

 

 

 

You can use this mode to connect any de-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

coder to your TV.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Press the “ ” or “ ” buttons to set it “On” or

 

 

 

 

 

 

 

You can change only Colour system and

“Off”.

VCR.

 

 

 

 

When you select Decoder(EXT-2) “On”,

Selecting Programme

EXT-2 output will be chosen as TV mode only

• Using “

 

” or “

” button select Programme.

and any scrambled channels will be un-

 

scrambled through decoder connected your

• To select programme number, you can use

TV via EXT-2 output.

“ ” / “

 

” button or Digit Buttons.

Setting VCR (Video Cassette Recorder )

Selecting Band

 

 

Mode

Band, can be chosen either,

• This item can be seen in TV, EXT-1,EXT-2,

• “C” or “S” by “

” or “ ” button.

EXT-3 and EXT-4 modes.

• If you want to watch a VCR source from one of

Selecting Channel

these modes, then it will be better to set VCR

 

 

 

 

 

 

 

Channel can be changed by “ ” or “ ” button

mode “on”. For this, while the cursor is on

this item press the “ ” or “ ” buttons to set

or by Digit Buttons.

Selecting Colour System

it “On”.

• If you want to watch a DVD , then you must set

 

 

 

 

 

 

 

Using “

” or “

” button on Colour System,

this item “off”; because DVD is not a source

you can change the colour system to PAL,

like a VCR and to see the picture better, you

SECAM or Auto.

 

 

must set the VCR mode “Off”.

Note: In EXT mode, you can choose NTSC

To Store Settings

3.58 and NTSC 4.43 as well.

• Press “ ” / “ ” or “OK” button on Store op-

Selecting Sound System

tion to store Install menu settings.

 

 

 

 

 

 

 

Using “

” or “

” button on Sound System,

• After stored, T-V Link menu will appear. If you

you can change the standard to BG, DK, I, L,

do not need to do T-V Link, select Cancel

Lp.

 

 

 

 

and press “ ” or “OK” button to exit the menu.

Selecting Fine Tuning

Program Menu

You can use the Fine Tuning process for fine

Press “MENU” button, now you are in main

adjustment (after coarse adjustment), if you

menu. In the main menu, select “Program”

are not happy about the image on the screen.

using “ ” or “ ” button. Then enter the

 

 

 

 

 

 

 

Use “ ” or “ ” button on Fine Tuning item,

Programme menu by pressing “ ” / “ ” or

until getting the best image on the screen.

“OK” button.

Selecting Search

Note: There is no Program menu in any EXT

To start the search process, press “ ” button

modes.

 

for forward search or “” button for backward search. If a signal is found or reaches to end

of the band after searching, press “” or “” buttons to continue search process. To stop

the search process when you want, press “” or “” buttons at any time.

ENGLISH - 18 -