Setting Hue

During Playback NTSC system, this will appear in AV mode only when NTSC video source is applied. Otherwise, Hue option is invisible in Picture menu in TV mode :

•Using “” or “” button select Hue.

•Press “” button to increase hue level.

•Press “” button to decrease hue level. Reset

Press BLUE button to reset the picture modes to factory default settings.

To Store the Settings

In the Picture Menu, all settings are stored automatically.

Sound Menu

As you enter the main menu, sound will be the second item. In the main menu, select Sound using “” or “” button, then enter the sound

menu by pressing “” / “” or “OK” button.

￿￿￿￿￿

￿￿￿￿￿￿

￿￿￿￿￿

￿￿￿￿￿￿￿

￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿

￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿

Setting Volume

As you enter the sound menu, Volume will be the first selected option.

•Press “” button to increase volume.

•Press “” button to decrease volume.

Or you can directly change the volume set-

tings using “ +” (to increase) or “- ” (to decrease) button.

Setting Bass Level

•Using “” or “” button select Bass Level.

•Press “” button to increase bass level.

•Press “” button to decrease bass level.

Setting Treble Level

•Using “” or “” button select Treble.

•Press “” button to increase treble level.

•Press “” button to decrease treble level. Setting Balance

It allows adjusting the distribution between the left and right speakers.

•Using “” or “” button select Balance.

•Press “” button to change balance right- ward.

•Press “” button to change balance leftward. Hyper Sound

•Using “” or “” button select Hyper Sound.

•Pressing “” or “” button will turn this fea- ture on or off.

Pseudo/spatial effect can be turned on or off via the Hyper Sound item in the Sound menu or by remote control. In Mono transmission the left and right channels will be added at left channel and dummy stereo effect will be introduced to end-user.

In stereo transmission it yields a phase difference between left and right channels. Hyper Sound selection will be displayed on the screen when the TV Status button is pressed or programme is changed.

To Change Audio Out Settings

Audio Out is a sub-menu of Sound menu.

Use this settings to adjust volume for audio out terminal which is located at the right side of the TV.

•Using ““ or “” button select Audio Out.

•Press ““ or “” button or directly press “OK” button on Audio Out, to enter the Audio Out menu.

￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿

Audio Out Volume

•As you enter the Audio Out sound menu, Vol- ume will be the only option.

ENGLISH - 16 -