Remote control

 

 

(continued)

Inserting Batteries

Install two “AAA” batteries,

3

Replace the compartment cover.

 

Open the battery compartment

1 cover in the direction of the arrow.

2 paying attention to the

 

 

 

polarity diagram in the battery

 

 

 

 

compartment.

 

 

Operation

 

 

 

Aim the remote control at the remote sensor and press control

 

 

buttons to operate.

 

 

 

Operate the remote control within a 30° angle on either side of

 

Approximately 15 feet

 

the remote sensor, up to a distance of approximately 15 feet.

 

 

 

 

BATTERY PRECAUTIONS:

 

 

 

Batteries should not be exposed to excessive heat such as sunshine, fire or the like.

The remote control unit uses infrared beams to transmit signals, so sunlight or fluorescent light on the remote

sensor may shorten operating distance.

 

 

Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries

properly.

 

 

 

Do not mix old and new batteries.

 

 

 

Do not mix alkaline, standard (carbon-zinc), or rechargeable, (Ni-Cd, Ni-MH, etc.) batteries.

Remove batteries if the remote control will not be operated for an extended period of time.

If this symbol is shown, it is only valid in the European union.

Power source

TO USE AC POWER

1.Connect the AC cord plug into this unit’s AC INPUT jack.

2.Connect the AC cord into an AC outlet.

AC outlet

Wider Hole

and Blade

 

 

AC 120V, 60Hz

NOTE:

AC cord (supplied)

Please make sure to insert the cord securely at both the LCD TV/DVD and the wall outlet.

The AC cord has a polarized type AC line plug. If the supplied AC cord does not match your AC outlet, contact

 

a qualified electrician.

 

WARNING:

• DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC CORD. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.

• DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE SPECIFIED. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.

CAUTION:

• WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF SAFETY, BE SURE TO UNPLUG IT FROM THE AC OUTLET.

• DO NOT PLUG/UNPLUG THE AC CORD WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL SHOCK.

• IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED ONE IS RECOMMENDED. CONTACT CUSTOMER SERVICE AT 1-800-289-0984.

14