Programming Your Remote
You can program your remote control to operate your external devices, using the instructions and codes on pages 51 - 57.
How to set the codes
1)Manually turn on the device.
2)Change the remote control mode according to the device by pressing the MODE button. Refer to the following list for which mode to use.
Device | Applied for these devices |
TV | JVC brand only |
|
|
STB | Cable Set Top Boxes, Cable/PVR Combinations, Satellite Set Top Box |
| DBS/PVR Combination |
|
|
VCR | VCR, DBS/PVR Combination, PVR, DVD/PVR Combination |
|
|
DVD | DVD Player, DVD Recorder, Home Theater in a Box, Receiver |
|
|
AUDIO | Amplifier, Home Theater in a Box, Receiver |
|
|
3)Find the remote control code for your device. See pages 53 - 57.
4)Set the remote code.
Advanced
| 1 | 2 | 3 |
TUNE | 4 | 5 | 6 |
|
|
| |
| 7 | 8 | 9 |
|
|
| RETURN + |
| TUNE | 0 | TV |
Press and hold | Enter the four digit number |
The mode indicator goes out for a second, then it lights.
5)Point the remote at the device and press power. If your device did not turn off or respond, try another code.
Notes:
•If your device doesn’t respond to any of the codes listed or is not listed, see page 52.
•Some codes may have only limited functions. Try other codes that may have more functions.
51
