Has three functions.

Return – Returns to the channel viewed just before the channel currently onscreen.

Return+ – Lets you program a specific channel to return to while scanning through the channels using the + CH – buttons.

TV – Returns to the TV mode when you are watching a video, DVD, etc.

Note:

•Press the TUNE and RETURN+ buttons. This will memorize the current channel to return to while you scan through the other channels.

To cancel, press the TUNE and RETURN+ buttons again.

Allows you to set the TV to turn on at a specific time to a channel of your choice and turn off automatically after a set amount of time.

On Timer / Input / Sleep Timer

Timer

On Timer

0 h

0 m

 

 

Input

0 - 0

Sleep Timer

0

min

Notes:

•If you set the interval of On Timer using the 2 3 buttons, select the channel at input and press the OK button.

•After you set On Timer and turn off the TV, the power lamp lights.

•You can check the remaining time of On Timer by displaying this menu again.

•You can set the interval of Sleep Timer using the 2 3 buttons.

•60 seconds before the TV turns off, a message will appear and it will count down the remaining time.

•See page 52, “On Timer using iPod”.

Operations Basic

English

19