JVC LVT1139-002A, KW-XC888 Finding the beginning of a tune, To fast-forward and rewind a tape

ENGLISH

To fast-forward and rewind a tape

Press ¢ for more than 1 second to fast-forward the tape. When the tape reaches its end, the tape is reversed and playback starts from the beginning of the other side.

Corrent tape direction

Press 4 for more than 1 second to rewind the tape. When the tape reaches its end, playback of the same side starts.

Corrent tape direction

To stop fast forward or rewind at any position

on the tape, press TAPE (PROG).

Tape play starts from that position on the tape.

Note:

When the tape reaches its end while fast-forwarding, the tape direction will be changed automatically.

Finding the beginning of a tune

Multi Music Scan allows you to automatically start playback from the beginning of a specified tune. You can specify up to 9 tunes ahead of or before the current tune.

During playback

Specify where (how many tunes ahead of or before the current tune) the tune you want is located.

Press ¢ repeatedly to locate a tune ahead of the current tune on the tape.

Press 4 repeatedly to locate a tune before the current tune on the tape.

When the beginning of the specified tune is located, playback starts automatically.

Notes:

•While locating a specified tune:

–If the tape is rewound to its beginning, playback starts from the beginning of that side.

–If the tape is fast-forwarded to the end, it is reversed and played from the beginning of the other side.

•In the following cases, Multi Music Scan may not operate correctly:

–Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions.

–Tapes with short non-recorded sections.

–Tapes with high level noise or humming between tunes.

12