Notes:
•If you release your finger from the button, the manual search will automatically turn off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz for AM) until you release the button.
Storing stations in memory
You can use one of the following methods to store broadcasting stations in memory.
¥Automatic preset: SSM
¥Manual preset
Automatic preset: SSM
You can preset up to 6 local stations in each FM band (FM1, FM2, and FM3).
1 Select the band (FM1, FM2, or FM3).
2 Press MONO/SSM for more than 1 second.
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually.
Ex.: Storing an FM station of 92.5 MHz into the preset channel number 1 of the FM1 band
1 Select the FM1 band.
2 Tune in to a station (in this example, of 92.5 MHz).
To tune in to stations of higher frequencies
To tune in to stations of lower frequencies
3 Press and hold the number button (in this example, 1) for more than 2 seconds.
ENGLISH
ÒSSMÓ appears, then disappears when automatic preset is over.
Local stations with the strongest signals are searched for and stored automatically in the band you have selected (FM1, FM2, and FM3). These stations are preset in the number buttonsÑNo. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in the number 1 button will be automatically tuned in.
Preset number flashes for a while.
CONTINUED ON THE NEXT PAGE
7
