Introduction
15
(Continued)
Connections
You can enjoy pictures of better quality using the
following cord instead of the supplied video cord.
You can enjoy better quality pictures than when
using the S-video cord.
CAUTION
Use one of either the S-video cord or the
component video cord. If both cords are used,
pictures may not be played back properly.
NOTE
In order to enjoy pictures with the progressive
mode ( page 29), the TV is required to have
progressive video input.
If the component video input jacks of your TV are
BNC type, use a plug adapter (not supplied) to
convert the plugs.
• After making all other necessary connections,
connect in the power plug.
NOTE
The preset setting such as preset channels and
sound adjustment may be erased in a few days in
the following cases:
- When you disconnect the power plug.
- When a power failure occurs.
When you connect the power plug into the AC
outlet, "DEMO START!" appears in the display
window and the demonstration display starts.
When you press on the main unit, "DEMO
OFF" appears in the display window and the
demonstration display is canceled.
Turning on the main unit automatically cancels the
demonstration display.
Resuming the demonstration display
With the power turned off, press on the main
unit.
Connect all necessary parts before connecting the power plug.
When a Clearer Picture Is
Desired
Connecting by using the S-video cord
TV Main unit
S-video cord
(not supplied)
S-VIDEO
Connect the ends of S-video cord making
sure that each end matches its compatible
terminal.
Connecting by using the component
video cord
TV
Main unit
Component video cord
(not supplied)
Connecting the Power Plug
AC outlet Main unit (rear view)
Demonstration display function
Hiding the demonstration display
With the power turned off, hold down
until "DEMO CLEAR" appears.
Disconnecting and then reconnecting the
power plug does not start the demonstration
display.
To activate the demonstration display again,
hold down until "DEMO START!"
appears.
UX-QD9[A]-03.fm 15 ページ 2004年9月22日 水曜日 午前11時4分