50
Convenient Functions English
Auto Standby
If no sound is produced for 3 minutes when the
disc or cassette tape is selected as a sound
source, the main unit automatically turns off.
■When the disc or cassette tape is selected
as a sound source
Press .
When playback or recording finishes, auto standby
starts the countdown (the "A. STANDBY" indicator
flashes). When no operation is carried out within 3
minutes, the main unit automatically turns off.
When you start playback or recording within 3 min-
utes, auto standby starts the countdown again
after playback or recording finishes.
When an operation other than playback and record-
ing finishes and no operation is carried out within 3
minutes, the main unit automatically turns off.
"A. STANDBY OFF" indicator starts to flash 20
seconds before the main unit is to turn off.
Press once again.
NOTE
• Leaving the volume at "0" is not the same as produc-
ing no sound, and therefore does not start the auto
standby function.
Disc Ejection Lock
You can prohibit ejection of a disc.
■When the main unit is turned off
While holding down , press on
the main unit.
Even if you press , "LOCKED" appears in the
display window and the disc does not come out.
In addition, when you press , while the main unit
is turned off, "LOCKED" appears in the display
window and the main unit does not turn on.
■When the main unit is turned off
Carry out the operation explained above once
again.
"A. STANDBY" stands for "Auto Standby".
Auto standby indicator
Auto standby performance
Canceling auto standby
Canceling the disc ejection lock
UX-QD9[UN].book 50 ページ ２００４年９月２８日 火曜日 午前１０時５４分