JVC CA-NXG9 manual Adjust the parameter, Indistinct, To +8

To adjust the picture tone

1Select “USER1” or “USER2.”

•Follow steps 1 and 2 explained in “To select a preset picture tone.”

2Select a parameter you want to adjust.

Setting the Clock

Without setting the built-in clock, you cannot use Daily Timer (see page 43).

•To exit the clock settings, press CLOCK/TIMER (while holding SHIFT) as required.

•To correct a mis-entry during the process, press CANCEL (while holding SHIFT). You can return to the previous step.

1Activate the clock setting mode.

GAMMA	Adjust if the neutral color is
	bright or dark (–3 to +3).
BRIGHTNESS	Adjust if the entire picture is
	bright or dark (–8 to +8).
CONTRAST	Adjust if the brightness ratio
	is unnatural (–7 to +7).
SATURATION	Adjust if the picture is
	whitish or blackish (–7 to
	+7).
TINT	Adjust if the human skin
	color is unnatural (–7 to
	+7).
SHARPNESS	Adjust if the picture is
	indistinct
	(–8 to +8).

3Adjust the parameter.

(while holding...)

0:00

•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected.

2Adjust the hour, then the minute.

CLOCK SET

Now the built-in clock starts working.

4Repeat steps 2 and 3 to adjust other parameters.

To clear the screen, press VFP again.

20